View Full Version : Spindle and hub identification

11-11-2010, 08:33 AM
Ok, I know it's a long shot but here are the casting numbers and bolt measurements off my front spindles right is 632783 with 593 below it, the left spindle is 632783 with 993 below it.
The top bolts measure 3 1/2 inches between the 3/8 bolt holes and the bottom measure 2 1/4 inch between the 7/16 or 3/4 bolt holes. The hubs are casting 05787 and are some sort of universal with 5 large wheel stud holes and 5 smaller holes maybe 3/8 bolt. Can anyone help to identify these spindles or hubs? I need to put brakes on the front of this car and my budget for this project is very limited. This does look like a drum set up to me but not positive. i couldn't post a photo here so follow this link to see a photo of the spindle in question. http://www.hotrodders.com/forum/t-bucket-brakes-spindle-hubs-187457.html#post1336845
Than You,