PDA

View Full Version : Fitting a Spirit Body on a TP frame?


Pop
01-24-2008, 11:01 AM
Will this work?
the frame rail width at the Distributer area is 26 1/2 inches outsid measurment. At the Kick up the measurement is 28 3/16 inches outside measurement

Hulkamania
01-25-2008, 10:26 AM
Our 23T body will fit a max of 27 inches OD to OD.....Our frame is 26 1/2" straight back.

Pop
01-25-2008, 06:27 PM
Hulk!
So I need to reduce the frame width to a max of 26 1/2 inches in the rear? And then I could be a Spirit Too?
Is that all their is to it?

Pop
01-25-2008, 06:41 PM
Oh , more questions
The kick up in the rear is about a 55 degree angle upwards and it is a 6 inch over all rise. The gas tank is 31 inches wide, and the transmission cross member will need a little trimming. Any other issues I need to consider?