Buckethead Bash Forums  

Go Back   Buckethead Bash Forums > Bucket Stuff > T-Bucket Tech
Register Gallery FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 04-28-2013, 01:09 PM   #1
Mikes27T
3rd Gear Member
 
Mikes27T's Avatar
 
Join Date: Nov 2011
Posts: 176
Default Trying to get the body to sit right on the frame???

Ok so I'm trying to get my 27T body to fit right on the frame and I'm about to pull my hair out. The body came pre drilled for the body mounts on the frame. I can get the front body mount bolts in "ok" but no such luck with the back body mount bolts. I can get one bolt in on the rear on either side but not both at the same time. So I'm taking measurements from the body to the frame to get it to sit right but I can't seem to get the body to sit right. Please see pictures.

When I take measure ments from this location (from inner side of the body to frame) I get the same measurements on both sides telling me it's even. (with one of the rear body mount bolts in place)



But when I measure from these locations the body is off by about a 1/2 inch from side to side. So on top it's even but on the bottom of the body It's off.


In this picture you can also see how much the body mount hole is off by.




So I'm not sure what to do here. I know I need to drill new rear holes for the body mounts but how the heck do you measure when the body is off like this? Even with the front body mount bolts in place the body is not even in front from side to side.

Help or tips would be great as I don't want my 27 to look stupid going down the road. Better to figure this out now then after I put even more time into this thing.

Last edited by Mikes27T; 04-28-2013 at 01:24 PM..
Mikes27T is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 05:32 AM.



Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.