![]() |
![]() |
#1 |
4th Gear Member
Join Date: Jul 2012
Posts: 284
|
![]() BC, Looking at the hydraulic shock mount, the shock stud seems long for just the shock. Am I not seeing something?
1. What is the best way to attach the mount to the frame. I could see putting bolts thru the sides, but thru to top to bottom don't seem right. 2. Where does the bottom of the shock mount? Looks to be with the top clevis, but not sure. I still do not have the body and frame off of the trailer. Going to build a body roll-a-round this weekend, so that i can get started setting up the frame. Found some pretty good looking powder coating for the front end. When finished it looks to be brushed aluminum. I will have a extra piece of tubing done and send you a sample. I will be ordering a few parts from you as soon as I get started on the frame. Should have went ahead on purchased the brake pedal assy, master cylinder and the rear coil overs while I was there. Thanks, Lee 1929 Sedan Delivery
__________________
If it ain't chopped, it ain't mine.. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|